Owner`s manual

28
CHRONOGRAPH (Stop Watch/Lap Timer)
• Pressing and releasing the M button momentarily 3 times
(< 2 sec each time) while the Watch Default Time screen
is displayed will access the Chronograph displaying
the elapsed time if previously started or 0:00:00.00
(hr:min:sec.1/100th sec), flashing.
• Pressing and releasing the S button momentarily (< 2 sec)
will Start the Timer which will begin counting up from
0:00:00.00 to 9:59:59.99 (hr:min:sec.1/100th sec) in
increments of .01 (1/100th sec).
• During the first 4 seconds the 1/100th second values will
be displayed after which 2 dashes ( . - - ) will be displayed
(Fig. 18). The 1/100th values will be recorded and
displayed when Laps are frozen and when later recalled.
• Subsequent pressing and releasing of the S button (<
2 sec each time) will freeze Lap Times (LAP1 through
LAP9). After 9 Laps are recorded, additional Laps will
replace LAP9, shift the others to lower LAP numbers, while
discarding LAP1.
• If the Timer reaches 9:59:59.99 hr:min:sec.1/100 sec),
it will stop and save that number as a LAP. Subsequent
presses of the S button will then have no effect.
• Pressing and releasing the A button momentarily (< 2
sec) will Stop the Timer and Recall LAP #1, displaying the
graphic LAP and Lap Time with the Lap #. Repeat presses
will display other Laps/Times (Fig. 19).
Fig. 18 - CHRONOGRAPH
Fig. 19 - LAP RECALL