Owner`s manual

• Depressing the A and S buttons simultaneously for 2 seconds will access Set Daily

Alarm.

• Depressing the M button for 2 seconds will revert to the Watch Default Time screen.

• If no button is pressed during a period of 2 minutes, operation will revert to the

Watch Default Time screen.

SET DAILY ALARM, information provided includes (Fig. 21):

> Graphics AL and SEt with clock (alarm) icon.

> Alarm Time previously set (hr:min) with the Hour Set Point ﬂashing.

• Depressing the S button while the Hour digits are ﬂashing will scroll upward through

the Set Points in 1 Hour increments at a rate of 8 per second.

• Pressing and releasing the S button momentarily (< 2 sec) will step upward through

the Set Points one at a time.

• Pressing and releasing the A button momentarily (< 2 sec) will save the Hour Set Point

and the Minute digits will ﬂash.

• Depressing the S button while the Minute digits are ﬂashing

will scroll upward through the Set Points in 1 Minute

increments at a rate of 8 per second.

• Pressing and releasing the S button momentarily (< 2 sec) will

step upward through the Set Points one at a time.

• Pressing and releasing the A button momentarily (< 2 sec) will

save the Set Point and revert to the Daily Alarm Status screen

indicated by the graphic ON (or OFF) ﬂashing.

• Depressing and holding the M button for 2 seconds will revert

to the Watch Default Time screen.

Fig. 21 - SET DAILY ALARM