Owner`s manual

SET F GROUP (FO2)

Sequence -

Set F >> FO2 Gas 1 >> FO2 Gas 2 >> FO2 50% Default.

> Depressing the A and S buttons simultaneously for 2

seconds while the NORM (or GAUG) Surface Main screen

is displayed will access the Set F screen (Fig. 32).

> Pressing and releasing the A button momentarily (< 2 sec)

while SET F is displayed will access Set FO2 Gas 1.

Set FO2 Gas 1, information includes (Fig. 33):

> Graphic FO2

> Max Depth allowed for the PO2 Alarm set with MAX and FT

(or M) icons and graphic - PO2, blank if Air

> Tank 1 icon representing Gas (mix) 1

> FO2 Set Point, ﬂashing

• Depressing the S button will scroll upward through the Set

Points from Air to 21 through 50% in 1% increments, at a

rate of 8 Set Points per second.

• The scroll will stop when the button is released, or

momentarily at 32% (even if the button is held depressed).

• Depressing the S button will resume the scroll from 32

through 50%, then stop at Air (or 21%).

Fig. 32 - SET F

Fig. 33 - SET FO2 GAS 1