Owner`s manual

56
Set Sampling Rate information includes (Fig. 50):
> Graphic SR (meaning Sampling Rate).
> Set Point (seconds value), flashing, with clock icon and
graphic SEC.
• Pressing and releasing the S button momentarily and
repeatedly (< 2 sec each time) will step upward through the
Set Points of 2, 15, 30, and 60 (seconds).
• Pressing and releasing the A button momentarily (< 2 sec)
will save the setting and revert to the Set U screen.
• Depressing the M button for 2 seconds, or if no button is
pressed for a period of 2 minutes, operation will revert to
the NORM (or GAUG) Surface Main screen.
SERIAL NUMBER
• Depressing the A and S buttons simultaneously for 8
seconds while viewing the NORM (or GAUG) Surface
Main screen will access the Serial Number screen
displaying (Fig. 51):
> Graphic SN.
> Factory programmed Serial Number.
> Firmware revision number (e.g., graphic r1A).
• Depressing the A and S buttons simultaneously for 2
seconds will revert to the Surface Main screen.
Fig. 50 - SET SAMPLING
Fig. 51 - SERIAL NUMBER