Owner`s manual

58
Plan Lead-in information includes (Fig. 52):
> Graphic FO2 with wave/clock/profile icons.
> PO2 Alarm Set Point and graphic PO2, if FO2 is set for
Nitrox, blank if set for Air.
> Tank 1 icon indicating that FO2 is for Gas (mix) 1.
> FO2 Set Point for Gas 1, Air or 21 to 50.
• After dives, press and release the A button momentarily
(< 2 sec) to access the Time to Fly screen, then again to
access the Dsat screen.
• Press and release the S button momentarily and repeatedly
(< 2 sec each time) to access the first Plan Depth/Time
screen and step upward through the sequence of screens.
The screens will sequence through Depths from 30 up to 190
FT (9 to 57 M), or the Max Depth that will allow theoretical No
Deco Dive Time of at least 1 minute based upon the previous
dive profiles in a series of repetitive dives and taking into ac-
count descent and ascent rates of 60 FPM (18 MPM).
NOTE: When the Conservative Factor is set ON,
No Deco Dive times are reduced to the values of
the next 3,000 foot (915 meter) higher Altitude.
Fig. 52 - PLAN LEAD-IN
- or -