Owner`s manual

Press and release the A button (< 2 seconds) to access the ALT 1

screen (Fig. 69A) that displays Elapsed Dive Time, press it again

to view the ALT 2 screen (Fig. 69B) that displays Temperature,

Time, and Max Depth, then if a Nitrox dive press it again to

view ALT 3 that displays FO2 and PO2 (Fig. 69C).

When the countdown reaches 0:00, the No Deco Main will be

displayed and the Deep Stop feature will be disabled for the

remainder of that dive.

In the event that you descend 10 FT (3 M) below, or ascend

10 FT (3 M) above the Stop Depth, for more than 10 seconds

during the countdown, the No Deco Main will be displayed and

the Deep Stop feature will be disabled for the remainder of that

dive.

If you return to within the +/- 10 FT (3 M) range during

the 10 seconds, the Deep Stop Main will reappear with the

countdown still in progress.

The Deep Stop feature will be disabled, and it's screens not dis-

played, for the remainder of that dive, if you enter Deco or High

O2 (80%), or descend deeper than 190 FT (63 M).

During High PO2 (=> Alarm Set Point), the DS screen informa-

tion will be replaced with High PO2 information.

Fig. 69A - DS ALT 1

Fig. 69B - DS ALT 2

Fig. 69C - DS ALT 3