Owner`s manual

93
POST DIVE AFTER 10 MINUTES ON SURFACE
Once 10 minutes have elapsed, the Surface Interval time colon
will stop flashing indicating that the Dive and Transition Period
are completed, and a subsequent descent will be considered
a new dive. Operation will revert to the Watch Default Time
screen.
The NORM Surface Main screen can be then be accessed by
depressing the M button 2 seconds. You will then have full ac-
cess to other NORM DC surface modes (e.g., Plan, Fly, Sat, Log,
Hist, Set, etc.).
• Press and release the S button momentarily (< 2 sec) to
access Plan Mode.
> Adjusted No Deco Limits will be displayed based on
residual nitrogen and accumulated oxygen calculated to be
remaining from the previous dives.
• While viewing the first Plan screen, press and release the
A button momentarily (< 2 sec) to access the Time to Fly
screen (Fig. 85), then press it again to access Dsat Time
screen (Fig. 86).
> The Desat counter provides calculated time for tissue
desaturation at sea level.
> If a Violation occurred during the dive, the Desat screen
will not be displayed.
Fig. 85 - TIME TO FLY
Fig. 86 - DSAT TIME