Installation guide

INSTALLATION MANUAL
t tit .................................................................................................. .........
The name plate, including model and serial number, is located on
the faceplate behind the Micro_ axe Drawer front.
Refer to the Operation Manual for cleaning instructions. If removing
the range is necessary fbr cleaning or maintenance, disconnect the
electrical pox_er supply. If the electrical supply is inaccessible, lift
the unit slightly at the front and pull out away from the _alL Pull
only as far as necessary to disconnect the electrical supply. Finish
removing the unit for servicing and cleaning. Reinstall in reverse
order making sure to level the range and check electrical connections.
See pages 2 and 3 for proper anchoring instructions.
Read the BEFORE YOU CALL and operating instruction sections
in your Operation Manual. It may saxe you time and expense. The
list includes common occurrences that are not the result of defective
workmanship or materials in this range.
Refer to the warranty in your Operation Manual for our toll-h'ee
service number and address. Please call or write if you have inquiries
about your range product and/or need to order parts.
Please do not open or close the lower oven door for 30
seconds after plugged in.
SHARP ELECT_ONIC$ CO_PO_ATION
® Sharp Plaza, Mahwah, New Jersey 07430-2135
T[NSEB390MRR1
_ECY_LED PAPER
PN_TEB I_ US_