User Manual

E-10
PREPARATION FOR USE
FILTER INSTALLATION
4
Fill in the usage
start date and
place on the unit as
guide for when the
ltersshouldbe
replaced.
Date Label
Unplug the unit before installing
oradjustingthelters.
1
Remove the Back Panel.
Gently push down on the tabs,
then tilt and remove the back
panel.
Installthelters
Tomaintainthequalityofthelters,theyarepackedinplasticbagsandplacedin
theunit.Besuretoremovetheltersfromtheplasticbagsandreplacetheltersin
the unit before initial use.
Removethelters
2
Remove the Washable
Deodorizinglter(black)
andTrueHEPAlter
(white) from the plastic
bags.
Back Panel
True HEPA filter
(white)
Washable
Deodorizing
lter (black)
True HEPA lter
2
Insert the Back Panel’s 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodorizing
lterbetweentheTrueHEPAlterand
the Back Panel.
3
Gently push in the
upper tabs (left
and right) to lock
in place.
1
2
Tabs on the top
Washable Deodorizing lter
Back Panel
Bottom tabs
Upper tabs
1
I nstalltheTrueHEPAlter.
Please make sure that the True HEPA
lterisplacedinproperorientation.
Installing the lter backwards
will a󰀨ect the performance of
the unit.
KC-860U_4th.indb 10 2020/07/13 11:57:34