User Manual

1 Press the button.

2 If “5–” is indicated and the picture

does not change, press the

-/--

button to switch over to the 1-digit

select mode and press

again.

BASIC OPERATION (Continued)

Changing the Channels

Changing channels using the CHANNEL SELECT on the remote control

To select a one-digit channel

(e.g., Channel 5):

• To handle the increasing number of channels available, this LCD TV set allows you to select up to

100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow

the procedure shown below to select channels.

1 Press the

-/--

button to set the 2-

digit select mode.

2 Press the

button.

3 Press the

button.

To select a two-digit channel

(e.g., Channel 15):

 Complete this procedure within 4 seconds,

otherwise the selection will not be made.

Changing channels with the CH ( )/( ) on the remote control.

Press the CH ( ) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .

Press the CH

( ) button and the channels change in the order shown below:

3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .

Note:

VOL

TV/VIDEO

DISPLAY

BRIGHTSLEEP

POWER

MPX

-/--

CHANNEL

SELECT

CH ( )/

( )