Operation Manual

12
Basic Operation
|
Press the MAIN POWER switch
located on the upper part of the
main unit. The Power/Standby
indicator instantaneously changes
from red to green and the main
unit is turned on.
Note:
■ The display time of the on-screen
indicators can be selected with “On-
screen time” for the “On-screen
display” menu item in the TV menu
(see page 36).
|
To turn off the main power, press
the MAIN POWER switch.
Turning On and Off the Main Power
Switching the TV/VIDEO (AV1/AV2/AVS/TV) Mode
1 Turn on the power of the
connected video equipment.
2 Press TV/VIDEO to select the
applicable input source. The
screen displays AV1, AV2, AVS or
TV mode each time TV/VIDEO is
pressed.
Note:
■ About the video modes
• AV1: Select this when viewing the
signals from the video
equipment connected to the
AV-IN 1 terminal.
• AV2: Select this when viewing the
signals from the video
equipment connected to the
AV-IN 2 terminals using the
VIDEO terminal for video
input.
• AVS: Select this when viewing the
signals from the video
equipment connected to the
AV-IN 2 terminals using the
S-VIDEO terminal for video
input.
Power/Standby indicator
MAIN POWER
198 AV2
197 AVS
1 S08
199 AV1
1 S08
On-screen display
AV1 mode
AV2 mode
AVS mode
TV mode
iE
CH
TV/VIDEO
SOUND
END
T
M
MENUTEXT
(
RED
)(
GREEN
)(
YELLOW
)(
CYAN
)
INFO
OK
TV/
VIDEO