Operation Manual

30
AV Connections (Continued)
[3] For programmes 1...196
The influence of the AV control voltage and of fast blank at programme positions from 1 to 196
can be set.
Useful Features (Continued)
1
Perform steps 1 and 2 in [1] At
AV1 (programme 199)/AV2
(programme 198)/AVS
(programme 197) to display the
“AV connections” screen.
2 Press ]/[ to select “For
programmes 1...196,” and then
press OK to display the “For
programmes 1...196” screen.
3 Press ]/[ to select the desired
item.
4 Press </> to select “yes” or “no.”
Notes:
■ If the item concerned is set to
“yes”, the appropriate picture is
through-connected at all pro-
gramme positions from 1 to 196
when a control voltage/an RGB
signal is applied.
■ When you use RGB mode
(SCART): In on screen menu AV
connections, select “For Pro-
grammes 1...196.” Set “AV control
voltage” to “yes”, and “RGB on-
screen display” to “yes”.
If “AV control voltage” is set to “no”,
the function will not work correctly.
5 Press END to exit.
AV connec t i ons
Back
End
For progr ammes 1. .. 196
AV cont rol vol tage
RGB on-screen display
no yes
At AV1
( p r o g r amme
199
)
AV connec t i ons
At AV2
(programme
198
)
Decoder p rog r ammes
For progr ammes 1. .. 196
Back
End
At AVS
( p r o g r amme
197
)
iE
CH
TV/VIDEO
SOUND
END
T
M
MENUTEXT
(
RED
)(
GREEN
)(
YELLOW
)(
CYAN
)
INFO
OK
END
]/[
</>
OK