Manual

Watching TV
Press POWER on the TV, or POWER on the remote control
_, unit to turn the power on.
• POWER indicator: Power on, Green; Power off, red.
Press POWER on the TV, or POWER on the remote control
,_, unit again to turn the power off.
[_ _ • The TV enters standby and the image on the screen
__' disappears.
_POWER
If you are not going to use this TV for a long period of time, be sure to remove the
AC cord from the AC outlet.
• Small amount of electric power is still consumed even when the TV is turned off.
If there is no signal input for 15 minutes, the power will turn to standby mode
automatically.
When you turn on the TV for the first time, the
Initial Setup will guide you through the setup
process. Perform the following steps before
you press POWER on the remote control unit.
1. Insert the batteries into the remote control
unit. (See page 10.)
2. Connect the antenna cable to the TV. (See
page 9.)
3. Plug in the AC cord to the AC outlet. (See
page 8.)
2. Language setting
• Select the OSD menu language from
English, Spanish, or French.
• Press A/T to select the desired
language listed on the screen, and then
press the P-to the next step.
TV USB PC MENU
'\ J '\ /' _X. /'
1,
Initial Setup
• The Initial Setup screen display at the first
use. Press ENTER to start the EZ setup.
"IV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifies for
ENERGY STAR in Home mode default setting.
ENERGY STAR qualification is based on AV MODE
"STANDARD".
3. Location setting
• Press A/T to select "Home" or "Store"
and press _ to the next step.
Q-19