Manual

QUICK REFERENCE
o . • •
1. Attach your antenna to the back of the
television, (See page 9,)
2. Connect the AC plug for the television into
the AC outlet,
Place the TV close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120V, 60Hz
AC outlet. Connecting it to any other kind of outlet will
damage the product and invalidate the walranty.
$ = = = • = • =
Use the remote control unit by pointing it towar
ds the remote control sensor on the TV. Objects
between the remote control unit and the remote
control sensor may prevent proper operation.
Remote control sensor
3o°` I,L", / m/
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3. How to turn on the television for the first
time,
A) Press POWER on the television,
B) The POWER indicator on the front of
the television lights Green,
Dvll
.... 8_11
I D_II
ore_ t POWER
Speakers cannot be detached from the TV.
4. Insert the batteries into the remote control
unit, (See page 10,)
* The angle is 22 °when the stand is attached,
Cautions regarding the remote control
unit
Do not expose the lemote control urfit to shock. In addKion,
do not expose the/emote contlol unit to liquids, and do not
place in an area with high humidity.
Do not install or place the lemote control unit under dilect
sunlight. The heat may cause deformation of the/emote
cont/ol unit.
The/emote contlel unit may not work p/operly if the/emote
control sensor on the TV is under dilect sunlight or stleng
lighting. In such cases, change the angle of the lighting or the
TV, or operate the lemote cent/ol unit closer to the lemote
control sensor.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE
CONTACT US AT 1-800-BE-SHARP.
@9-8