Manual

Basic adjustment settings
Adjusts the picture to your preference with the following
picture settings.
Press MENU to display the MENU screen,
and then press 4/_ to select "Picture".
Press A/V to select a specific adjustment
item.
Press 4/_ to adjust the item to the desired
level.
Press MENU to exit.
• For resetting all Picture adjustment items to the factory
preset values, press A/Y to select "Reset", press ENTER,
press _11/_ to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen,
and then press 4/_ to select "Picture".
Press A/V to select "OPC".
Press 4/_ to select "On" or "On: Display".
Off The brightness is fixed at the value set
in "Backlight".
On Automatically adjusts
On: Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit.
When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
Backlight
The screen dims
Contrast For less contrast
Brightness For less brightness
Color For less color
intensity
Tint Skin tones become
reddish
Sharpness For less sharpness
The screen
brightens
For more contrast
For more brightness
For more color
intensity
Skin tones become
greenish
For more sharpness
Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "Fine Motion Advanced", "3D-Y/C',
"Monochrome", "Film Mode" or "Range of OPC". See page
27.
Q= 26