Manual

Basic adjustment settings
Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down ifthere is no signal for 15 minutes.
Press MENU to display the MENU screen,
and then press 4/1_ to select "Power
Control".
Press A/Y to select "No Signal Off", and
then press ENTER.
Press 41/1_ to select "Enable", and then
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
This setting allows you to optimize the settings of
Digital broadcasting.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen,
and then press 41/1_ to select "Digital
Setup".
Press A/V to select "Audio Setup", and then
press ENTER.
Press A/V to select "PCM" or "Dolby
Digital", and then press ENTER.
,, "Disable" is the factory preset value.
,, When a TV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press MENU to display the MENU screen,
and then press 41/1_ to select "Power
Control".
Press A/Y to select "No Operation Off", and
then press ENTER.
Press 41/1_ to select "Enable", and then
press ENTER.
Fiveminutes before the power shuts down, the
remainingtime displays everyminute.
Press MENU to exit.
PDM The optical output terminaloutputs
audio signalin PCMform. If your
digital audiosystem does not support
Dolby Digital,select "PCM".
Dolby Digital The optical output terminaloutputs
audio signalin DolbyDigitalform.
It reproduces sound from surround
program of digital.
Press MENU to exit.
"Disable" is the factory preset value.
Q - 29