Manual

Using external equipment
To view external source images, select the input source
from iNPUT on the remote control unit or on the TV.
iNPUT FLASHBACK
@©
VOL OH
FREEZE MENU
0 @
_ r-----1 C----q CD _
VOL v CH ,/_ INPUT POWER
Press iNPUT.
• A list of selectable sources appears.
Ifthe image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.
Press MENU to display the MENU screen,
and then press 4/_ to select "Option".
Press A/V to select "Input Select", and then
press ENTER.
Press A/V to select the signal type you
want to set, and then press ENTER.
If the selectedsignal type is incorrect, images
are not displayedor displayedwithout any color.
Press MENU to exit.
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press iNPUT again to select the input
source.
An image from the selected source automatically
displays.
Each time iNPUT is pressed, the input source
toggles.
You can also select the input source by pressing
A,/_'.
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Refer to your external equipment operation manual for the
signal type.
If you set INPUT 1 or 2 to Auto, the TV will automatically
select the input signal.
Check the operation manual of the external equipment for
the signal type.
Setting INPUT 1 or 2 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
iNPUT t or 2:
(_ COMPONENT VIDEO
(_) VIDEO
See pages 13 to 15 for external equipment connection.
Q= 30