Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT FLASHBACK
©
VOL CH
FREEZE MENU
0 ®
Press INPUT to select the desired input
source.
Press MENU to display the MENU screen,
and then press 4/_ to select "Setup".
Press A/V to select "Input Label", and then
press ENTER.
Press A/T/4/I_ to select the new name for
the input mode, and then press ENTER.
Example
•=P DVD
Allows you to set a time when the TV automatically
switches to standby.
FAVORITE CH
® ® ®FAEj_
AUDIO AVMODE CC
CD CD CD
Press SLEEP.
o The remaining time displays when the sleep timer
has been set.
I Sleep Timer: Remaining 30 L
Each time you press SLEEP, the remaining
time switches as shown below.
When set, the time automatically starts counting
down.
If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
Five minutes before the time expires, the
remaining time displays every minute.
[off ]-[ 30 ]...[ 60 ]
L[ 1_o]-I _o IJ
Select "Off" by pressing SLEEP to cancel the sleep timer.
The TV will enter the standby when the remaining time
reaches zero.
When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
You cannot change labels if the INPUT SOURCE is TV.
Q- 33