Manual

Useful adjustment settings
AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
Press AV MODE again before the mode
displayed on the screen disappears.
The mode changesas shown below.
When the input source is "IV, iNPUT t, 2 or 3 terminals
(Example)
STANDARD For a highly defined image in a normal
lighting
[Enhanced Picture Contrast: on]
MOVIE For a movie
[Enhanced Picture Contrast: off]
GAME Lowers image brightness for easier
viewing
[Enhanced Picture Contrast: off]
PC For PC
[Enhanced Picture Contrast: off]
USER Allows the user to customize settings
as desired. You can set the mode for
each input source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed) Changes the image and sound
settings to the factory preset values.
No adjustments are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC For a clear-cut image emphasizing
high contrast, useful for sports
viewing
[Enhanced Picture Contrast: on]
Some input signals may have to be registered manually
When the input source is INPUT 4, 5 or 6 terminals
(Example)
You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
"Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024 x 768 1360 x 768
You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen,
and then press 4/1_ to select "Setup".
Press A/V to select "Input Signal", and then
press ENTER.
Press A/T to select the desired input signal
on the display.
Press MENU to exit.
Q- 37