LC-80LE940X LC-60LE940X LC-52LE840X LC-46LE840X LCD COLOUR TELEVISION OPERATION MANUAL LC80LE940X_EN_book.
LC80LE940X_EN_book.
ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. ENGLISH OPERATION MANUAL Contents Introduction................................................................. 3 Precautions For Daily Use ....................................... 3 Important safety precautions...................................
Connecting a PC....................................................... 68 Connecting a PC .................................................. 68 Displaying a PC image on the screen .................... 68 Selecting the picture size .................................. 68 Adjusting the PC image automatically............... 69 Adjusting the PC image manually ..................... 69 PC control of the TV ............................................. 70 Command list ................................................
Introduction Precautions For Daily Use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently. • Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack. • Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
Introduction • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
Introduction 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.
Introduction Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) AV cable ( x 2) Component cable ( x 1) Yellow Pages 12 and 15 Page 12 Green Page 30 Page 30 Stand unit LC-80LE940X Page 10 LC-60LE940X Page 9 LC-52/46LE840X Page 8 3D glasses accessories AC cord ( x 1) Operation manual LC-80LE940X only Optional accessories The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tipresistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the TV to the wall or a pillar using View from the top extra strong ties and cup hooks. n o Wall Cup hook (commercially available) Tie (commercially available) Fixing the TV to the table Place the TV on the table.
Preparation 4 Attaching the stand unit – 52/46LE840X Insert and tighten middle screws into the holes on the rear of the TV. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. Screwdriver CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Middle screws Confirm that there are screws with the stand unit.
Preparation Attaching the stand unit – 60LE940X 4 Insert and tighten middle screws into the holes on the rear of the TV. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. Screwdriver CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Middle screws Confirm that there are screws with the stand unit.
Preparation Attaching the stand unit – 80LE940X 4 • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. The case is equipped with push-in tabs to hold the cushioning materials in place. Push in the tabs (2 for each location) to secure the cushioning materials in the case. Push-in tabs CAUTION • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Preparation 4 Connecting the TV Bundle the cables. 1 2 Insert the clip into the hole on the TV. Bundle the cables. Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. 1 Connect the antenna cable.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” 3 Close the battery cover. size batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Part names and functions TV (front view) POWER MENU INPUT CH VOL + /− 3D infrared emitter*1 POWER Remote control sensor *1 *2 OPC sensor*2 SLEEP POWER indicator OPC SLEEP timer indicator OPC indicator This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D glasses. Refer to page 76 for details. OPC: Optional Picture Control (Page 37) 13 LC80LE940X_EN_book.
Part names and functions TV (rear view) USB 1 port RS-232C terminal PC terminal AUDIO OUTPUT OUTPUT (Headphones/AUDIO (L/R)) terminal*1 USB 2 port (WIRELESS LAN) HDMI 1 (HDMI/ARC) terminal (INPUT 1) HDMI 2 (HDMI) terminal (INPUT 2) HDMI 3 (HDMI) terminal (INPUT 3) HDMI 4 (HDMI/MHL) terminal (INPUT 4) INPUT 5 (AV IN) AUDIO (L/R) terminal IN AUDIO (L/R) is shared with AV IN) INPUT 5 (COMPONENT) terminal ETHERNET (10/100) terminal AUDIO IN (HDMI 2/PC) jack*2 INPUT 6 (AV IN) terminal DIGITAL AUDIO OUTPU
Part names and functions Remote control unit 8 1 9 EXT MEDIA 2 10 3 4 TV INFO 17 18 11 12 5 * 6 7 13 19 14 20 15 MENU 8 9 16 10 21 GUIDE 11 12 13 14 15 16 SLEEP 22 23 24 25 26 27 28 17 18 19 20 21 1 2 3 4 5 6 7 < (Standby/On) To switch the power on and off (Page 19). EXT MEDIA buttons AQUOS LINK If external equipment such as a AQUOS BD player is connected via HDMI cables and is AQUOS LINK compatible, you can use these EXT MEDIA buttons. See pages 32 and 35 for details.
Quick guide What is the HOME? You can easily launch to enjoy Internet connection and Home network function and to perform settings for the TV from this “HOME” screen. Basic operation MENU Display the HOME screen Press HOME and the “HOME” screen displays. Exit the HOME screen The operation will exit the “HOME” screen if you press B before it is completed. Select an item Selecting in the HOME. Press a/b/c/d to select the desired service or menu, and then press ?.
Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Clear Cancel Delete Cursor Left 1 2 3 4 5 6 Char. Set Changes character set into the alphabet, numbers, symbols, etc. Caps Changes characters to capital/lower case. Done Confirm the entry. Cancel Abort input and close the software keyboard. R/G/Y/B (Colour) buttons Selects the coloured items on the screen. 7 8 9 Caps Char.
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? 1 Press < on the TV. • The initial auto installation wizard appears. 2 Setting the OSD language. Press a/b/c/d to select the desired language, and then press ?.
Watching TV Daily operation Turning on/off the power – using the control panel of the TV Turning on/off the power 1 Turn on the power. Press < on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press < on the TV after inserting the power plug. 2 Turn off the power. Switch it off by pressing < on the TV. Turning on/off the power – using the remote control unit Standby mode EXT MEDIA TV INFO 1 To standby mode.
Watching TV Watching TV (DTV only) Programme information (DTV only) Option Programme info. While watching DTV you can check the extended programme information on the screen using INFO on the remote control. Press > to change “DTV” or “ATV”. NOTE • When watching Digital Radio or Data broadcasting, the image is switched to DTV. • When watching external video source, the image is switched to ATV or DTV, which was watched lastly.
Watching TV Switching the digital audio format (DTV only) When receiving a bilingual signal Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO. Bilingual mode If multi sound modes are received, each time you press MPX the mode switches as follows. L/R L R Audio (ENG) CH A ATV STEREO Audio (ENG) ATV CH A LR CH B CH A CH B ATV CH AB ATV MONO Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
Watching TV Teletext View setting Text language What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning teletext on/off 1 Select a TV channel or external source providing a teletext programme.
Watching TV View setting Initial teletext page (DTV only) If you set the language of the initial page (this page is displayed for the first time after pressing m) for teletext in DTV mode, it will start from the selected language page. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Initial teletext page”. 2 Press a/b/c/d to select the desired language, and then press ?. NOTE • This function is available for teletext in DTV mode.
Watching TV Option EPG (DTV only) EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/ RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting Genre icon setup You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “EPG setup” > “Genre icon setup”.
Watching TV Selecting a programme using EPG (DTV only) Basic operation E Display the EPG screen Today EPG [DTV-TV] Press GUIDE. 001 TV1 20:00 - 21:00 [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 [Fri] 1/4 20:00 SD Moving 20 21 22 23 0 1 TV1 001 SD Moving SD Moving TV2 002 HD ColorBar HD ColorBar TV3 003 H264 SD-Color P...
Watching TV 4 Search a programme in a category 1 2 3 Press G. Press a/b to select the desired genre, and then press ?. Press a/b to select a programme you want to watch, and then press ?. EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri] 1/4 20:00 [Fri]8 Search by genre [Today] 1 12-0 [Sat] 2 0-12 [Sat] 2 12-0 [Sun] 3 0-12 Movie News Entertainment Sports Children’s Found no programme by the genre.
Watching TV Timer setup using EPG You can switch to a programme at a set time. Press GUIDE. Press a/b/c/d to select the programme you want to set, and then press ?. 1 2 Programme info. Back to EPG Watch 3 Next Time shift No Press c/d to select “Watch” or “Time shift”, and then press ?. • If you select “No”, the TV returns to the EPG screen. 4 Press c/d to select “Yes”, and then press ?. • The selected TV programme is marked with an icon. 5 Press ? to select “Back”.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 68 for connecting a PC to the TV.
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. • Both HDMI and DVI use the same HDCP copy protection method.
Connecting external devices Y PB (CB) PR (CR) Component connection Example of connectable devices E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the INPUT 5 terminal when connecting a DVD player/recorder or other device.
Connecting external devices NOTE Audio connections • If the image is not in sync with the audio, check the settings of the connected surround system. Speaker/amplifier connection E After connecting Connect an amplifier with external speakers as shown below.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on.
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Use the following procedure to start recording. Check the following items before recording. • Make sure the antenna cable is connected properly. • Check if the recording media (HDD, DVD, etc.) has enough capacity for recording a programme. • Select the equipment for recording in Selecting Recorder. EXT MEDIA 1 Use the following procedure to start playback.
AQUOS LINK AQUOS LINK control Auto power on Selecting recorder Set to “On” to enable HDMI CEC functions. If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. • The factory default for this item is “Off”. Here, you can select a recorder for the recording from several connected recorders.
AQUOS LINK E Auto power on When an MHL-compatible device is connected to the TV, the TV turns on automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 35.) E Auto input selection When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 35.
Basic adjustment NOTE Picture settings *1 Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Menu Setup CH list : Select :Enter :Back *2 “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4” or “PC” from the “INPUT” menu. “x.v.Colour” is available only when accepting an “x.v.Colour” signal through an HDMI terminal. • You can select a different “AV mode” item for each input mode (for example, select “STANDARD” for TV input and “DYNAMIC” for VIDEO input).
Basic adjustment NOTE Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. • This effect is greater on fast moving images. • This function will have no effect in the following cases. 1) The type of signal received is a PC signal. 2) An OSD is being displayed. 3) Teletext is activated. • If images appear blurred, set to “Off”. Quad pixel plus 2 Smoothes diagonal lines by detailed dot control. C.M.S.
Basic adjustment Range of OPC Audio settings The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE Go to “HOME” > “TV Menu” > “Setup” > “Audio”. Menu CH list : Select :Enter • This function is available only when the “OPC” setting is set to “On” or “On:Display”. • The maximum setting cannot be set to a smaller number than the minimum setting.
Basic adjustment Audio Audio Surround Audio description setting (DTV only) This function produces a surround effect from the speakers. Item 3D Stadium Reproducing lifelike experience of excitements such that live sports or concert performances in a stadium create. 3D Hall Reproduces a concert hall experience with realistic live surround sound based on reverberant sounds measured in a concert hall.
Basic adjustment Power save settings ECO Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu CH list : Select :Enter Setup :Back No signal off When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. NOTE • Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.
Basic adjustment View setting Channel settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. Menu CH list : Select :Enter Programme setup You can run the auto search procedure again at any time by accessing the “Setup” menu and “Programme setup”. Channels can be tuned automatically or manually. Setup Digital setting (DTV only) :Back View setting Auto installation Channel settings You can reconfigure the DTV channel settings automatically or manually.
Basic adjustment Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your password whenever you tune to the service. CH skip Press G button. Services with a mark are passed over when pressing CHr/s on the TV or remote control unit. Delete Manual adjust You can reconfigure the analogue TV channels settings automatically or manually. After selecting “Yes” on the screen, press a/b/ c/d to select the channel you want to set and then press ?.
Basic adjustment Label When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually. Select each character of the new name for the channel with using the software keyboard (see page 17). NOTE • The name can be five characters or less. Select “Cancel” to set the channel name.
Useful viewing functions Individual setting – Password View setting Password NOTE • As a precautionary measure, make a note of your password on page 88, cut it out and keep it in a safe place that children cannot reach. • This function is only available for TV input mode. • To relock a channel which has been temporarily unlocked by inputting the correct password, turn power off and then on again. Allows you to use a password to protect certain settings from being accidentally changed.
Useful viewing functions Example of time difference with GMT Local GMT off set Individual setting – Language Canberra Sydney +10:00 View setting Singapore Kuala Lumpur +8:00 Digital audio language (DTV only) Bangkok Jakarta +7:00 New Delhi +5:30 Cairo +2:00 Set up to three preferred multi audio languages to display if the audio languages are available. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
Useful viewing functions Item (for SD [Standard-Definition] signals) Optional features settings Normal Keeps the original aspect ratio in a full screen display. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. Panorama In this mode, the picture is stretched toward each side of the screen. The picture may appear similar to “Full” depending on broadcast signals. Full For 16:9 squeeze pictures.
Useful viewing functions Skipping specified inputs Option 4:3 mode Option The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Full”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Full Wide image without side bars. Normal Normal range keeping 4:3 or 16:9 aspect ratio. WSS signal 4:3 screen 4:3 mode “Normal” 4:3 mode “Full” Input skip This setting allows you to skip the inputs on the input source selection operation.
Useful viewing functions Option Option Input label Headphone/Audio out select You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ?. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Press ? to display the software keyboard and select each character of the new name for the input source (page 17). 4 Repeat the above until the name is fully spelt out, and then press @.
Useful viewing functions Adjusting image position Option Headphone out setting Option You can select the headphone/speaker audio output when using the headphones. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”. Item Headphone Audio output from headphones only. Dual Audio output from headphones and speakers.
Useful viewing functions Additional features Option Game play time This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Game play time”. Item On Under connecting a game console to the TV, the elapsed time is displayed in 30-minute increments after you start playing a game. Off Hides the time. NOTE • This function is displayed in the external input mode.
Network function Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
Network function NOTE • When using the SHARP wireless LAN USB adapter (optional accessory), try to provide as much free space around the device for best performance. • A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower.
Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface USB Frequency band 2412f2484 MHz 5150f5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit power and sensitivity Tx output power: (Typical) 2.
Network function Using the skype Welcome to skypeTM You can enjoy video calls on your AQUOS. E How to start skype NOTE Using AQUOS.NET By connecting the TV to the Internet, you can enjoy a variety of broadband content. 1 2 • A broadband Internet connection and network function are required to enjoy video calls. 1 Press HOME to display the “HOME” screen. Press a/b/c/d to select “AQUOS.NET” service, and then press ?. HOME Buy a communication camera.
Network function 5 Press a/b/c/d to select a function, and then press ?. Selected item Description Go back to the previous page. Go to the next page. Refresh the page. Interrupt a page while it is loading. Display the bookmarks list. Display the AQUOS ADVANTAGE LIVE. Display the Browser menu. Display the cursor. Add the current page to your bookmarks. 6 Press a/b/c/d to select the “address bar”, and then press ?. Example : The image shown below, which is only for explanation, is subject to change.
Network function DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Other useful features For time shift Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. You need to complete the following procedure to use the USB storage device for time shift. After selecting “Time shift +”, the TV starts initialising the USB storage device. Follow the screen prompt to complete the setting.
Other useful features Buttons Disconnecting the USB device When you disconnect the USB device, be sure to the following steps. REC E REC STOP H Stop recording. I Playback the recorded programme. H Stop the programme in playback and go back to the real time broadcast (live). F Pause the programme in playback (time shift recording continues). • This function is released in 15 minutes. S Reverse (each time you press this button, the reverse speed changes in three levels).
Other useful features Time shift recording You can record the programme you are watching to the registered USB storage device. Starting time shift recording Press REC E. • The TV starts time shift recording. NOTE • You can also operate from the control panel by pressing CONTROL. • You cannot switch the channel or the input source during time shift recording. • Time shift + overwrites existing data when a new recording starts.
Other useful features Time shift playback Playback recorded scenes of the programme being recorded. Press d during time shift recording. • The last recorded programme can be replayed after the end of recording. • Press H to return the scene that is broadcasting. NOTE • You can also operate from the control panel by pressing CONTROL. • Time shift playback may take a few moments to start.
Other useful features View setting Device registration You need to perform this function to register the USB storage device for the time shift. Go to “HOME” > “TV Menu” > “Setup” > “View setting” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 59) for registering a USB storage device. NOTE • Only one USB storage device can be registered for time shift. Remove all USB storage devices except the one used for time shift.
Other useful features USB media/Home network USB media/Home network Selecting modes and drives/servers 1 In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE USB media mode (Example) 1 • To connect a Home network server, refer to Network function (Pages 51 – 53). • Some USB devices may not work properly for this function.
Other useful features 3D mode Photo mode You can view photos in 3D mode. Press B to display the “USB media menu” screen. Press a/b to select “3D display”, and then press ?. Viewing thumbnails 1 2 • See pages 72 to 76 for details on the 3D function. NOTE • In 3D mode, you cannot rotate the photos. • You can select “3D display” from “USB media menu” only when the thumbnails screen for the photo mode in USB media mode is displayed on the screen.
Other useful features E Slide show Slide show Buttons for slide show operation (When using USB media mode) E Selecting the BGM Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. This function is available only for the USB media mode. Buttons Description C Return to the previous operation. 3D Switch between 2D and 3D modes. DISPLAY Reveal/hide the guide display. B button Display the “USB media menu”.
Other useful features Buttons Video mode 16 Files 8 Files 15 Files 15 Files Buttons 3D Switch between 2D and 3D modes. R button Start playback from the previously stopped scene.*1 G button Stop a video. Y button Display the USB control panel. B button Display “USB media menu”. • Title (edition) • Chapter • Show video information • USB device removal 0–9 Jump to scenes at 10% increments (0%–90%). • Limited to files without chapters. DISPLAY Reveal/hide the guide display.
Other useful features USB device compatibility Selecting the picture size for video mode You can select the picture size in “Video mode”. Select “Video mode”. USB device USB memory, USB card reader (Mass Storage class), USB HDD • Refer to Selecting modes and drives/servers on page 63. File system FAT/FAT32/NTFS Press WIDE. Photo file format JPEG (.jpg) (DCF2.0 compliant), MP (.mpo) (CIPA DC-007) Music file format • MP3 (.
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size PC HDMI 1, 2, 3 or 4 terminals n You can select the picture size. 1 Press WIDE. • The “Wide mode” menu displays. 2 HDMI-certified cable Press WIDE or a/b to select the desired item. EXAMPLE PC HDMI 2 terminal* Input signal o 1024g768 1360g768 p DVI/HDMI cable 3.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Option Fine sync. Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from the “INPUT” menu, and then press ?. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.”.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM POWER SETTING INPUT SELECTION A COMMAND CONTROL CONTENTS CONTROL ITEM VOLUME POSITION WIDE MODE PARAMETER CONTROL CONTENTS U T E 0 _ _ _ TOGGLE MUTE O W R 0 _ _ _ POWER OFF (STANDBY) M U T E 1 _ _ _ I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) M U T E 2 _ _ _ MUTE OFF C S U 0 _ _ _ SURROUND TOGGLE MUTE I T V D _ _ _ _ TV (CHANNEL FIXED) A I D T V _ _ _ _ DTV (CHANNEL FIXED) A C S U 1 _
Enjoying 3D image viewing You can use special 3D glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through 3D glasses, sold separately. • To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. • Not all consumers can experience and enjoy 3D TV.
Enjoying 3D image viewing 3 Viewing 3D images Take off the 3D glasses and turn off the power of the 3D glasses. • Press the power button for at least two seconds. • The LED light lights for two seconds. MENU NOTE • If the input signal switches to 2D, 2D images are displayed automatically. • 3D mode is canceled automatically when the setting is changed, input source is changed, the input signal resolution is changed or the power is turned off.
Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select “2D s 3D”, and then press ?. 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen once per hour. • When the TV converts normal 2D images into 3D images, you can display the “2D s 3D convert effect” menu to adjust the convert effect by pressing Y.
Enjoying 3D image viewing 3D still image effect setting 3D setup Select the method for adjusting the 3D still image effect (depth). E Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected.
Enjoying 3D image viewing Troubleshooting – 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “Off”? Press 3D to switch to 3D mode. • If “3D auto change” is set to “Mode 1” or “Mode 2” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press 3D to select the appropriate display format for the 3D image.
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • When the power switch does not work, remove the power plug and insert it again, and press < on the TV after waiting more than five seconds. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
Appendix Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”. 2 If you have already set the password, enter it here. 3 Press c/d to select “Yes”, and then press ?. Updating your TV via DVB-T (DTV only) Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available.
Appendix Getting information Updating your TV via USB/Network Information Information Message list (DTV only) Software update When new software is detected, you can confirm the update information and download the software from “Message list”. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Message list”. NOTE This function allows you to update to the latest software using a USB device or Network. 1 Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software update” > “USB update”.
Appendix Information on the software licence for this product Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Trademarks TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Appendix Specifications Item LC-80LE940X LC-52LE840X Resolution 1,920 x 1,080 Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV function TV-standard Receiving channel Analogue PAL ( B/G, D/K, I), SECAM ( B/G, D/K, K/K1), NTSC:(M) Digital DVB - T VHF/UHF 44.25-863.25 MHz TV tuning system STEREO/BILINGUAL Audio amplifier Terminals ANT (Antenna input) LC-46LE840X Auto preset 02ch/07ch/09ch/10ch/28ch at Australia.
Appendix Removing the stand LC-60LE940X 1 Loosen the two screws used to secure the stand cover. 2 Remove the stand. 1 Unfasten the four screws used to secure the stand in place. 2 Remove the cover. For wall mounting with the optional bracket (AN-52AG4 or AN-80AG1) remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc) from the terminals. • Before performing work, make sure to turn off the TV.
Appendix Mounting the TV on a wall To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. 1 * 2 * Only for 60/52/46 inch models 1 • This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 6). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Appendix LC-80LE940X The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. We recommend you to contact a technician for assistance when installing it. SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own. CAUTION • Install your wall mount on a solid wall perpendicular to the floor.
Appendix Dimensional drawings LC-80LE940X *2 63 88 *3 99 *4 1867 996.30 *1 609 179 1114 1148 1771.20*1 445 484 736 336 400 200 600 421 LC-60LE940X 23*2 39*3 55*4 747.63*1 1329.12*1 438 178 386 10° 106 219 AN-52AG4 *1 *2 *3 *4 Active area Thinnest part Excluding projecting part Including projecting part NOTE • Dimensions do not include protrusions such as screws and some parts. 86 LC80LE940X_EN_book.
Appendix Dimensional drawings LC-52LE840X 57*4 34*3 27*2 648.00*1 1152.00*1 299 340 507 382 300 112 20° 101 314 AN-52AG4 LC-46LE840X 27*2 572.67*1 1018.08*1 345 266 20° 57 299 340 101 294 AN-52AG4 *1 *2 *3 *4 Active area Thinnest part Excluding projecting part Including projecting part NOTE • Dimensions do not include protrusions such as screws and some parts. 87 LC80LE940X_EN_book.
Appendix CLEARING THE PASSWORD 1 2 3 Go to “HOME” >“TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”. The password input screen displays. Press and hold both CHr and Y+ on the TV simultaneously until the message appears on the screen. NOTE • To set the password again, refer to Password on page 45 and follow the instructions. The Password is . NOTE • As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COSTS APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
Printed in Malaysia TINS-F547WJZZ 12P07-MA-NP LC80LE940X_EN_book.