Manual

introduction to Connections
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
+ Over-the-air broadcasting via HD quality antenna
+ HD cable/satellite subscription
+ HD compatible external equipment
+ For informationon updatingto HD programming,askyour cable/satelliteserviceprovider.
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
+ The illustrationsof the terminalsarefor explanationpurposesand mayvaryslightlyfrom the actualproducts.
HD HDMI-certified cable [_ H_m=
Quality _ @ O Page 14
HilJmll
®
AUDIO
DVI OUT
Y PB PR
®®®
COMPONENT
AUDIO
O 3.5 mm stereo minijack cable ® I
DVI-HDMI conversion cable
ARC
_=_ Component video cable {_
Audio cable
R-AUDIO-L
PaSta) PB_Os) Y
=_Page 14
=_Page 15
® ® Page15
Quality AUDIO VIDEO
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
iNPUT
+
AOUOS
NET APPS
Example
1 Press INPUT.
+ The INPUT list screen displays.
2 Press A/T to select the input source.
+ You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 --÷ HDMI2-_ HDMI3
t t
TV * HDMI4
+ An image from the selected source automatically
displays.
+ If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
D_ rtlo_ded _:_om www.ManualslJb.com mare a]s se{rch engine
(iD- 13