Manual

Connecting to External Equipment
[] When using optical fiber cane:
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 32 for details.) PCM audio
outputs from the terminal.
Optical fiber cable
Back panel
horizontal inputs
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Optical digital audio will be output in 2-ch stereo when it is from the external equipment connected to the TV using an HDMI cable.
[] When using audio cable:
Audio cable
Back panel
vertical inputs
................. 11
See page 32 for details on the Output Select function.
w
Back panel
HD Cable!Satellite set-top box vertical in rots
HDMI-certified cable
If the image is not in sync with the audio, check the settings of the connected surround system.
Letting the TV output the audio to an AV amplifier:
When you connect ARC-compatible equipment, use the HDMI 1 terminal.
If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.
(D- 16
D_ rtlo_ded _:_om www.ManualslJb.com mare als se{rch ertgine