Manual

Connecting to External Equipment
Refer to page 57 for a list of PC signals compatible with the TV.
[] When using HDMI cane (HDMI 1, 2, 3 or 4):
HDMI-certified cable
Back panel
vertical in )uts
_,.-tDrNI
L2/ I.t g211"lrl |
c1/ _,ti_ l'lrll
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable
to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMl+Analog". (See page 57.)
The HDMI terminals only support digital signal.
[] When using DVI-HDMI conversion cane (HDMI 1): Back panel
horizontal inputs
@3.5 mm stereo minijack cable
vBear_ikcaP_in_uts
When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMl+Analog". (See page 57.)
[] When using analog RGB cane (PC IN): Back panel
Analog RGB cable surface inputs
(D-sub 15-pin cable or VGA cable) CA"ALOQRaB,PC,,_
°
Back panel
horizontal inputs
When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 57.)
D_ rtlo_ded _:_om www.ManualslJb.com mare als se{rch ertgine
(iD- 17