Manual

On-Screen Display Menu
Example
AQUOS 1
NET APPS
1 2 3
1 Press MENU to display the MENU screen, and then
press 4/_ to select "Initial Setup".
2 Press A/T to select a specific adjustment item,
and then press ENTER.
• Whenyou select "EZSetup","CH Setup", "Parental
CTRL"or "Reset",youcan enterthe 4-digit secret
number here.Seepage35 for setting a secret number.
3 Press A/T (or 4/_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
"13/Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is
set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set,
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)"
if there is no operation for 30 minutes. When "Off" is
selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings
are completed, the Feature Deme screen is displayed if
there is no operation for several minutes.
- ENERGY STAR qualification is based en AV MODE
"STANDARD".
Antenna & Cable/STB: Select the type of connection
you will use to watch TV.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
- If"Cable" is selected for Antenna setting, scrambled
channels are removed after the Channel search has been
completed.
Completed: The settings confirmation screen is displayed.
Confirm the information displayed on the screen.
• See Initial Installation on pages 18 to 20 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
If initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air),ANALOG (Cable), DIGITAL (Air)and
DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using OH
A/V.)
Off: Does not skip channels. (Channel selection enabled using
CHA/V.)
Remove Scrambled CH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
• See Initial Installation on pages 18 to 20 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
(D- 34
[)_ nlo_ded f_om www.ManualslJb.com rnam als se_ rch engine