Manual

QUICK REFERENCE
[] LC=46LE832U/LC-52LE832U
1 Confirm that there are 9 screws (4 long screws, 4 4
middle screws and 1 short screw) supplied with the
stand unit.
Attach the supporting post for the stand unit onto
the base as shown below.
• The supportingpost attachesto the baseat anoff-
centeredlocationon the base. Besureto attach the
supportingpost inthe directionindicatedbelowand
attach the standto the TV with the widerside of the
basefacingforward. (_)
t_ _='_ Long screws
2
3
Insert the stand into the openings on the rear of the
TV.
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
Middle screws
5 @ Insert the stand cover.
(_ Insert the screw to secure the stand cover.
Short screw
• To detach the stand, perform the steps in reverse
order.
[] LC=60LE832U
1
2
Confirm that there are 10 screws (4 long screws, 4
middle screws and 2 short screws) supplied with the
stand unit.
Attach the supporting post for the stand unit onto
the base as shown below.
The supportingpost attachesto the baseat anoff-
centeredlocationon the base. Besureto attach the
supportingpost inthe directionindicatedbelowand
attach the standto the TV with the widerside of the
basefacingforward.
®
_ tl t t _---- Long screws
3 Insert the stand into the openings on the rear of the
TV.
4 Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
_ Middle screws
II II 1
5 @ Insert the stand cover.
(_ Insert the 2 screws to secure the stand cover.
Short screws _t_ t_)
(iN)- 8
To detachthestand, performthesteps in reverse
order.
D_ rtlo_ded flora www.ManualslJb.com mare als se{rch engine