Operation Manual, Quick Start Guide

20
BEFORE USING THE MACHINE
Setting an A6 paper
Load the paper with the copy and print side facing up. The diagram shows an example of printing on the front side.
When setting an A6 paper, prepare a dedicated guide plate according to the procedure described below.
1
Raise the guide plate for the A6 paper
that is present on the paper platen.
2
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
3
Insert the paper into the tray.
Load the paper with the side you want to print on facing up,
positioning the paper under the protrusion on the A6 division
plate and under the roller on the right side of the tray.
Load a number of sheets that is not higher than the indicator
line (maximum 80 sheets).
If you will load a different size of paper after using the tray,
close the A6 division plate.
Guide plate for A6 paper