® 2018 Hi sense Company Ltd. All Rights Reserved. All material in this Quick Start Guide is the property of Hi sense Company Lid. and its subsidiaries, and is protected under US and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hi sense Company Ltd., is a violation of Hi sense Company Ltd. rights under the aforementioned laws.
Register Your TV! Congratulations on the purchase of your new TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below. Because we value your business, we want to keep you in the know of "all things SHARP". Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app.
Packaged Contents Your package In which you purchased your new TV contains the following rems: = 2 AAA batteries % Left and right leg that forms the TV stand « Quick Start Guide = Important Safety Information and Warranty Card © 4 screws (M4x25) (65%) = Remote Control i: 4 screws (M4x20) «= Power Cord © 4 screws (M4x40) (437) IMPORTANT: To prevent accidentally discard ms that came with your TV, be sure to check ALL of the foam in the carton box.
Buttons and Ports on the TV TV Side View pad i Back View of the TV Power Input TV Bottom Panel 2 5 TV Back View o B g (839
TV Side View pie ant Cable Back View of the TV (657) Oo Au) service OUT = o® ® HOMO HDMI = Power Input TV Back View TV Bottom Panel .
STEP 1. Attach the TV Stand or Wall Mount Bracket (not included) Attach the TV Stand (For steps to attach the wall mount see page 7) CAUTION: Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets. + The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Ba sure to protect the TV screen from getting scratched or damaged by any hard objects.
For(65") To attach the left and right leg that forms the stand: 1. Carefully place your TV face-down on a soft, flat surface to prevent the TV from being damaged or the screen from getting scratched. 2. Remove the 2 legs from the foam and then insert the legs into the bottom slots of the TV. 3. Use the screws that came inside the carton with your TV to secure each leg tightly.
Attach the Wall Mount Bracket {not included) Before you begin the third-party manufacturer instructions, be sure to do the following things: 1. Place the TV face down on a clean, safe and cushioned surface. 2.Remove the TV stand if you already attached it. 3.Place the spacers (not included) in the corresponding bracket holes. Spacer Bracket {not provided} (not provided) CAUTION: « When you attach the mount, be sure to use the spacers {provided by the third-party manufacturer) between the TV and the bracket.
STEP 2. Connect Devices to your TV Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color. label ort Cable textual Equipment Hof Description ri neon ANT/CABLE oO Connect an outdoor VHF/UHF antenna. Connect a High Definition Multimedia Interface HOMO = (HDMI) cable farm an external device.
label Able Textual Equipment Brief Description AUDI iQ Connect headphones to hear audio from the Headphones with microphones are not supported. N ==p Audi Familiar Connect an audit adapter (not provided) from an external analog audio system. UsB Connect a USB device for browsing photos, music and movie. Hard disks with a total current consumption or impulse current consumption greater than 500mA are not supported. LAN LAN Connect an Theme cable to access a network or the Interment.
STEP 3. Establish a Network Connection 1.Press the [ = ] button on the remote control, press V ] button to select Settings and then press [OK] to enter the Settings menu, 2.Select Network — Network Configuration. TV JACK External Modem IP Sharer (Router) {ADS /SLAV/ Cable TV) (with CPD server) Modem Cable LAN Cable Establish a wired network connection Automatically obtain an IP address 1.Select Wired LAN. The TV will automatically obtain an IP address and connect to the network.
Establish a wireless network connection ‘Wireless router with CPD Wireless LAN Adapter but-in TV set The TV can directly receive network signals via wireless router 1.Select Wireless. The list of networks will be displayed automatically. 2.Select a wireless network from the list, Input the password and select Connect. 3.1f the network connection does not appear In the list, select Refresh to refresh the list or select Add to manually enter SAID and Security made selection.
Buttons on your TV remote o» Power on / off 0° Display the Home screen Number Enter Channels / input numbers + CH= Channel (up/down) — Dash button / Select a digital sub channel MTS Set the audio metalanguages) Choose to leave the Video description feature NRT On or Off LYCHGATE D-pad (up/down/left/right navigation buttons) NOTE: The buttons that appear on your remote may differ from the descriptions that we've provided for context.
STEP 4. Begin Using your Remote 1.Slide the back cover to open the battery compartment of the remote control. Gently push and slide Insert the batteries Gently push and slide 2.Insert two AAA size batteries. Make sure to match the and and of the batteries with the and ( } ends indicated in the battery compartment. 3.Replace the battery compartment cover. Important Information about the remote and batteries: Discard batteries in a designated disposal area. Do not throw them into a fire.
customer service center. STEP 5. Power on the TV If your Cable or Satellite provider does not have a code available, please . us at one of the phone numbers on 1. Plug the power cord into a power outlet. Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ Remote If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view a list of the codes.
Press the Power button ©) on the remote to tum on the TV. A splash screen that shows the logo appears. Next, the First-Time STEP 6. Complete the First-Time Setup Menu Setup Menu begins by prompting you to choose your Language, After the splash screen that shows the logo appears, begin the Firestone, and Time Zone. time setup menu. LLP Pd iia Rng fr Task + Using the D-pad arrows of your remote, choose your Language, Revlon and Time Zone. + Choose Dee r Agra.
Screen Task STEP 7. Begin to Enjoy your TV ct » Registering helps keep your product humming 26s with software updates, product support and our Your Smart TV is easy to use and brag-worthy! warranty. L281 sta) * You are at the last step of TV setup. If you have n = not connected poi 4 you can Eon Sat up Now that you've completed the first-time setup menu, the Home network’ or ‘Use without network’. If you have screen is your starting point for navigating the TV.
QUICK PROBLEM-SOLVING TIPS When you experience an issue with your TV, tum it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us at one of the phone numbers on Page 1. POSSIBLE SOLUTIONS + Check if the power cord is plugged into a powered AC outlet. « Crass the ¢!s Power button on the remote control to activate the unit from ‘Standby’ made. +» Check to see if the LED light is on or not.
Certification and Compliance FCC Notice This device has bean tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.