Brochure for MX-M1056 / MX-M1206

14. MX-FN21
Finisher
MX-PN13A/C/D
9. MX-CF11
Inserter
4
15. MX-FN22
Saddle Stitch
Finisher
MX-TM10
Trimming Module
11. MX-RB13
Relay Unit
10. MX-GB57A
GBC SmartPunch
Plus Unit
13. MX-RB13
Relay Unit
12. MX-FD10
Folding Unit
8. MX-RB18
Curl
Correction
Unit
1
Required if MX-LC13N is installed.
2
Required if 2 x MX-LC13N are installed.
3
Can be end of conguration.
4
Requires MX-RB13 or MX-FD10.
Certain optional equipment may not be available in some areas.
* A4 or smaller, 80 g/m
2
.
16. MX-BM50
Booklet Maker
(Plockmatic)
19. MX-CF50
Cover Feeder
18. MX-FD50
Square Folder
17. MX-TM50
Trimmer
20. MX-XB50
Rail Unit
Configuration Diagram and Options
Options
Base unit
MX-KB18 Keyboard
1. MX-MFX1 Multi Bypass Tray (for Base Unit)
A5R-A3W, 100 sheets (80 g/m
2
)
Can be end of configuration
2. MX-LC12 Large Capacity Tray (A4)
A4-B5, 3,500 sheets (80 g/m
2
)
Requires MX-MFX1. Cannot be installed with MX-LC13 N
3. MX-LC13 N Large Capacity Tray (A3) (2 drawers)
SRA3 - B5, 2,500 sheets each (80 g/m
2
)
Requires MX-RB16 and MX-MF11. Cannot be installed with MX-LC12 or MX-MFX1
MX-RB17 Connection Module
Required if 2 x MX-LC13 N are installed
MX-RB16 Paper Pass Unit (between Base Unit and MX-LC13 N)
Required if MX-LC13 N is installed
4. MX-MF11 Multi Bypass Tray (for MX-LC13 N)
A3-A5R, 500 sheets (80 g/m
2
)
5. MX-SL10N Status Indicator Lamp
6. MX-PE16 Fiery Server
Requires MX-PX16 Interface Kit and MX-KB18 Keyboard
7. MX-PX16 Interface Kit
Requires MX-PE16 Fiery Server
Finishing
8. MX-RB18 Curl Correction Unit
Corrects paper by putting pressure on the convex/concave curl
Required if MX-FN21 or MX-FN22 is installed
9. MX-CF11 Inserter (200-sheet x 2 bin)
A3–A5R, 200 sheets each (80 g/m
2
)
Requires MX-RB18 and either MX-RB13 or MX-FD10
10. MX-GB57A GBC SmartPunch Plus Unit (A4)
Available die sets:
21 holes, Plastic Comb; 20 holes, Plastic Comb,
47 holes, Color Coil
23 holes, Wire 2:1/Square; 23 holes, Wire 2:1/Round
34 holes, Wire 3:1/Square; 34 holes, Wire 3:1/Round
12 holes, VeloBind
2 holes/Round (8mm pin); 4 holes/Round (8mm pin)
2 holes/Round (6.5mm pin); 4 holes/Round (6.5mm pin)
4 holes Scandinavian
Custom die sets also available on request
Requires MX-RB13 and either MX-FN21 or MX-FN22
11. MX-RB13 Relay Unit (between 100-sheet finisher and inserter)
Must be installed if MX-FD10 is not required
12. MX-FD10 Folding Unit
Folding options include Z, C, accordion, double & half folds
Can only be installed with MX-FN21 or MX-FN22
13. MX-RB13 Relay Unit
14. MX-FN21 Finisher (4k - 100-sheet staple)
A3 - B5 (oset/staple), SRA3 - A5R (non oset)
Upper tray: 1,500 sheets*
Middle tray: 250 sheets*
Lower tray: 2,500 sheets*
100-sheet* staple capacity
Requires MX-RB18. Cannot be installed with MX-FN22.
10