RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
Battery Pack Installation
ON
O
FF
C
ONNE
C
T
ION K
IT
6. Press the circuit breaker’s trip button. If the
circuit breaker switch has not moved to the
Trip position, do not use the battery pack.
Contact LG Chem or your distributor.
ON
O
FF
C
ONNE
C
T
ION K
IT
7. Measure the voltage at the terminal block us-
ing a voltmeter. If the voltage is higher than
0 V, do not use the battery pack. Contact LG
Chem or your distributor.
O
N
O
FF
C
ONNECT
IO
N
K
IT
8. To secure the battery pack to the wall, re-
place the top cover and tighten the screws to a
torque of 2.75 N·m.
24