RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
Battery Pack Installation
4.5 Installation clearance
300 mm
300 mm
9 mm
300 mm
300 mm
300 mm
300 mm
300 mm
9 mm
ON
OFF
C
O
NNECTION KIT
ON
OFF
C
O
NNECTION KIT
Make sure to leave a space of at least 9 mm between the battery pack and the wall. A
clearance of at least 9 mm must be left around the battery pack for proper cooling.
NOTICE
Make sure that the battery pack is always exposed to the ambient air. The battery
pack is cooled by natural convection. If the battery pack is entirely or partially
covered or shielded, it may cause the battery pack to stop operating.
4.6 Securing battery pack to wall
Secure the battery pack to a wall to prevent it from moving. If the battery pack is
installed above the oor or on a platform, make sure that the wall or platform is capable
of supporting the battery pack’s weight.
25