RESU 3.3, 6.5, 10, RESU Plus

Battery Pack Installation
1. Determine where the mounting brackets are
to be placed using the drill template.
2. Drill holes in the wall for the M6 (0.25 in)
screw anchors. The drilling depth should be
at least 50 mm.
3. Drive the screw anchors through the mount-
ing brackets into the holes.
4. Tighten the screws to a torque of 5 N·m.
NOTE
It is allowed to use any other type of fastening suitable for the wall material.
ON
OFF
CONNEC
TION KIT
5. Remove the top cover.
26