RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
Battery Pack Installation
4.7.3 Connecting power cables for RESU Plus
NOTE
Skip this task if the RESU Plus is not installed.
ON
O
FF
C
ONNE
C
T
ION K
IT
To supply power to the RESU Plus for its operation, connect the provided power cables
from the battery pack to the RESU Plus.
1. Insert the connector of the power cable into the power connector.
2. Feed the power cable through the middle of the small cable entries and then
through a small grommet
3. Push the grommet into the cable entry.
4.7.4 Connecting charging cables
ON
O
FF
C
ONNE
C
T
ION K
IT
1. Feed a pair of charging cables through each of
the large grommets and then through each of
the large cable entries.
29