RESU 3.3, 6.5, 10, RESU Plus

Conguration Switches
6.2 Conguring RESU Plus
SW select CAN_H CAN_L GND TermRes
Switch number Type Label Default
1 DIP SW select 0011
2
2 Rotary CAN_H 4
3 Rotary CAN_L 5
4 Rotary GND 2
5 DIP Term Res 11
2
6.2.1 Setting for communication interface
Make sure that the SW select DIP switch is set to 0011
2
.
6.2.2 Settings for CAN bus pins
See the section of the same title on page 40.
6.2.3 Setting for terminal resistors
Make sure that the TermRes DIP switch is set to 11
2
. See the section of the same
title on page 40.
41