RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
Firmware Update
ON
OFF
CONNECTION KIT
4. Press and hold the update button beside the
memory card slot for more than 3 seconds.
5. The LED indicators ash in cycles for 1 minute
at most until the rmware update is complete.
Only the ON indicator comes on when the
rmware update is successful. If it fails, the
Warning indicator comes on for two seconds.
Check the memory card and try again. If it
persistently fails, contact LG Chem or your
distributor.
ON
OFF
CONNECTION KIT
6. Remove the memory card. Push the memory
card gently until it is disengaged from the slot,
and pull it out.
7. Replace the lid.
8. Turn on the inverter.
47