RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
1 Safety
NOTE
To use rechargeable batteries, installers are required to comply with standard AS
4086.2 in Australia, VDE-AR-E2510-2 in Germany, and the domestic legislation in
other countries.
1.1 Symbols on product labels
The nameplate is attached to the left side of the battery pack, and the warning label is
attached to the top.
CONNECTION KIT
ON
OFF
The voltage of this battery pack is strong enough to cause electric shock.
Make sure that the battery polarity is connected correctly.
Keep the battery pack away from open ame or ignition sources.
Keep the battery pack away from children.
6