RESU 3.3, 6.5, 10, RESU Plus
Table Of Contents
- Contents
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
Safety
Read the manual before installing and operating the battery pack.
The battery pack is heavy enough to cause severe injury.
The battery pack may leak corrosive electrolyte.
The battery pack may explode.
The battery pack should not be disposed of with household waste at the
end of its working life.
The battery pack should be disposed of at a proper facility for environmen-
tally safe recycling.
1.2 Safety instructions
For safety reasons, installers are responsible for familiarizing themselves with the con-
tents of this manual and all warnings before performing installation.
1.2.1 General safety precautions
WARNING
Failure to observe the precautions described in this section can cause serious injury
to persons or damage to property.
Observe the following precautions:
• Risks of explosion
– Do not subject the battery pack to strong impacts.
– Do not crush or puncture the battery pack.
– Do not dispose of the battery pack in a re.
• Risks of re
– Do not expose the battery pack to temperatures in excess of 60°C.
– Do not place the battery pack near a heat source, such as a replace.
– Do not expose the battery pack to direct sunlight.
7