Operation Manual, User's Manual

1-104
BEFORE USING THE MACHINE►LOADING PAPER
Custom Size Registration (Bypass)
If you frequently use a non-standard size paper in the bypass tray, register that paper size in advance.
Registering the paper size saves y
ou the trouble of setting the size each time you need to use it.
Up to Seven paper sizes
can be registered.
Tap the key ([Custom 1] to [Custom 7]) in which you wish to register or change a paper size, and the registration screen
appears.
Select whether you wish to enter the inches ("Size Input-Inch") or size in mm ("Size Input-AB"), and then set the X and Y
dimensions of the paper.
"Size Input-AB"
The X direction can be set between
140mm and 457mm. The factory default setting is 420mm.
The Y direction can be set betwee
n 90mm and 305mm. The factory default setting is 297mm.
"Size Input-Inch"
The X direction can be set betwee
n 5-1/2" and 18". The factory default setting is 17".
The Y direction can be set betwee
n 3-5/8" and 12". The factory default setting is 11".
Paper Type Registration
Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of
paper properties.
Up to 7 paper types can be registered.
List name Description
Type Name
Register any name.
The factory default names are "User Type 1" to "User Type 7".
Fixed Paper Side Use this setting when paper with a front and reverse side is used.
Disable Duplex Use this setting when paper loaded cannot be used for 2-sided printing.