Operation Manual, User's Manual

2-18
COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Check the paper (tray) and colour
mode you want to use for copying, and
tap the keys for any other settings you
want to select.
Tap the [Original] key and specify the orientation of the
original to have the orientation be correctly recognized.
► Specifying the orientation
of the original (page 2-32)
• Paper Select ►page 2-12
• Copy Ratio ►page 2-25
• Colour Mode ►page 2-19
•Original ►page 2-32
• Exposure ►page 2-22
•N-Up ►page 2-43
• Card Shot ►page 2-47
5
Tap the [Colour Start] or [B/W Start] key.
6
Set the next original, and tap the
[Colour Start] or [B/W Start] key to
scan the original.
Tap the same key you tapped in step 5.
Repeat this step until all originals have been scanned.
7
Tap the [Read-End] key to start copying.
Original
A4
Detail
Preview
Start
Colour
Start
B/W
Copies
CA
1
A4
Tray 1 1 → 1
Paper
Select
2-Sided Copy Copy Ratio
100%
11
Copies
Read-End
Place next original. Press [Start].
When finished, press [Read-End].
Staple / Punch
Paper
Select
A4
Tray 1
Off
Detail
8½x11
Tray 3 2 → 1
Paper
Select
2-Sided Copy Copy Ratio
100%
Copies
CA
Original
A4
1
Start
Colour
Start
B/W
Read-End
"Place next original. Press [Start].
When finished, press [Read-End]."