Operation Manual, User's Manual

2-32
COPIER►BASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
You can check the original size setting in CHECKING THE ORIGINAL SIZE (page 2-10).
To change the original size, touch the [Original] key and set the original size. Set the orientation of the image to ensure that
the orientation of the placed original is correctly recognized.
Specifying the orientation of the original
By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly
recognized.
Set the correct orientation of the original and then specify N-Up layout settings.
Specify the orientation and size of the original
Set the orientation and size of the original before scanning the original.
1
Tap the [Original] key to set the orientation of the original.
► COPY MODE (page 2-3)
2
If you want to specify the size, tap the [Detail] key and change to normal
mode.
► CHANGING MODES (page 1-11)
3
Tap the [Original] key.
4
Tap the [AB] tab or the [Inch] tab.
CA
Preview
Copies
Image
Orientation
Original
1
Start
Colour
Start
B/W
AB
5 ½x8 1/2 8 ½x11R 11x17
5 ½x8 1/2R 8 ½x13
8 ½x11 8 ½x14
8 ½x13
2
/
5
1
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Colour Mode
Preview CA
Others
No. of copies
Original
Direct Entry
Inch Custom Size
Image Orientation
Size: A4
Start
Colour
Start
B/W
3B4
A34
1
Size:
AB
A5 B5R B4
B5 216x340
A4
A4R
A5R A3
216x343
Original
Direct Entry
Inch Custom Size
Image Orientation
Auto A4
In Easy mode In Normal mode