Operation Manual, User's Manual

1-20
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Each Energy Save settings in System Settings is not applied when Custom/Eco mode is used.
AUTO POWER SHUT-OFF MODE
This mode turns off the power to the operation panel and the fusing unit, and makes the machine wait in the lowest
power consumption state.
Auto Power Shut-Off Timer will activ
ate when the set duration of time elapses in waiting status without executing a job.
Compared to preheat mode, the powe
r-saving rate is considerably higher but the wakeup time is longer.
The [Power Save] button blinks when the
machine is in Auto Power Shut-Off Timer.
Auto Power Shut-Off Timer is also activated by pressing the [Powe
r Save] button while the [Power Save] button is not lit.
This mode is cleared when print d
ata is being received, fax data is being output, or when the [Power Save] button is
pressed while it is blinking.
A message appears 15 seconds before Auto Power Shut-Off Mode is entered.
To close the message and continue
normal operation, tap the [Continue] button.
The message appears again 15 seco
nds before the end of the extension of normal operation time.
If no action is taken within 15 secon
ds after the message appears, the machine enters auto power shutoff mode.
Sleep Mode Power Level Low Power Low Power
Eco Scan On On (All Modes Except Copy)
To set mode settings
"Settings (administrator)" → select [System Settings] → [Energy Save] → [Eco Setting] → [Mode Setting].
To set Auto Power Shut-Off Timer:
In "Settings (administrator)", select [System Settings] → [Energy Save] → [Eco Setting] → [Auto Power Shut-Off].
To set display of the message:
In "Settings (administrator)", select [System Settings] → [Energy Save] → [Eco Setting] → [Display Message When
Extending Transition Time to Preheat/Auto Power Shut-Off Mode].
Function Custom Mode Eco Mode
[Power Save] button/indicator