Operation Manual, User's Manual

1-23
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Fix transition time.
The Auto Power-Off transition time is fixed.
When this setting is enabled, the [
Change transition time by time of day.] option is disabled.
Change transition time by time of day.
This function controls the transition to Auto Power Shut-Off mode optimally for each time period by analyzing the use of
the machine based on job logs obtained during a 4-week period.
When this setting is enabled, the
[Fix transition time.] option is disabled.
Transition to Energy Saving and Auto Power Shut-Off modes
* Factory default setting
If the Auto Power-Off is disabled, the time you have set here is disabled.
The image transfer control settings are not changed.
This does not link to the Power On/Off Scheduling. If both of them are enabled, the Power On/Off Scheduling settings
precede.
Pages are counted for each paper size separately.
When the power supply of the machine was off, there was no job during this time.
Pattern Transition time
Average outputs per
hour
*
Mode1 (Job Start
Priority1)
After 1 hour 700 or more
Mode2 (Job Start
Priority2)
After 30 minutes 150 to 699
Mode3 (Energy Saving
Priority1)
After 5 minutes 40 to 149
Mode4 (Energy Saving
Priority2)
After the minimum time period Up to 39
Sleep Mode Power
Level
Low Power : The machine switches to the power saving mode,
but it takes some time to recover.
Fast Wake Up : Compared with Low Power, the power value rises
by a certain degree, but it results in faster
recovery.