Operation Manual, User's Manual

7-11
SETTING MODE►SETTING MODE LIST
Printer Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A Page
● Printer Settings
 Condition Settings
 Prohibit Notice Page Printing Enabled No Yes 3-3
 Prohibit Test Page Printing Disabled No Yes 7-60
 A4/Letter Size Auto Change Disabled No Yes
3-7
 Print A3W (12x18) and 11x17 on A3 Size Paper Disabled No Yes
 Bypass Tray Settings No Yes
• Enable Detected Paper Size in Bypass Tray Disabled No Yes
• Enable Selected Paper Type in Bypass Tray Disabled No Yes
• Exclude Bypass-Tray from Auto Paper Select Disabled No Yes
 Job Spool Queuing Enabled No Yes B
 Disabling of USB Memory Direct Print Disabled No Yes 3-76
 Disabling of Network Folder Direct Print Disabled No Yes 3-77
 Disabling sending while printing Disabled No Yes 3-73
 Interface Settings No Yes
7-62
 Hexadecimal Dump Mode Disabled No Yes
 I/O Timeout 60sec. No Yes
 Enable Network Port Enabled No Yes
 Network Port Emulation Switching Auto No Yes
 Port Switching Method Switch at End of Job No Yes