Operation Manual, User's Manual

1-82
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
UNIVERSAL DESIGN IN THE MACHINE
The structure of the machine and the software are designed to allow all people to use the machine with ease.
UNIVERSAL DESIGN RELATED TO OPERATION
Adjustment of operation panel angle
The angle of the entire operation panel can be adjusted to enable use even when seated.
Changing of key response time
The response time of the keys can be changed as needed.
In "Settings" (administrator)", sele
ct [System Settings] → [Common Settings] → [Operation Settings] → [Condition
Settings] → [Key Operation Setting].
• Time for Accepting Key Entry
This setting determines how long a ke
y in the touch panel must be tapped until the key input is registered. The time
can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, ke
y input can be prevented when a key is tapped accidentally. Keep in mind,
however, that when a longer setting is selected more care is required when tapping keys to ensure that key input is
registered.
• Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to ch
ange continuously not only each time the key is tapped but while a key is tapped.
• Long-touch Detection Time
Select a time when a long
key touch is detected.
• Double Tap Speed Interval
Select an interval when a double tap is detected.