MSDS

MATERIAL SAFETY DATA SHEET
Date Revised :Feb.1.2007
Date Issued :Oct.1.2005
MSDS No. F-01396
7
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures Ventilation : Not required under intended use.
Exposure limit values
OSHA-PEL(USA) : 15mg/m
3
(Total Dust) , 5mg/m
3
(Respirable Dust)
ACGIH-TLV(USA) : 10mg/m
3
(Total Dust) , 3mg/m
3
(Respirable Dust)
Personal Protective Equipment
Respiratory Protection : None required when used as intended in Sharp equipment.
Hand Protection : None required when used as intended in Sharp equipment.
Eye Protection : None required when used as intended in Sharp equipment.
Skin Protection : None required when used as intended in Sharp equipment.
Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large quantity of
toner or during long term exposure, as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Physical State : Solid Form: Powder Color: Blue Odor: faint
Ph : Not applicable
Boiling/Melting Point : Not applicable
Softening Point(°C ) : 100 - 130
Flash Point(°C ) : Not applicable
lgnition Point(°C ) : No data
Explosion Properties : No data
Density(g/cm³) : Approx. 1.1 (bulk density : Approx. 0.4)
Solubility in water : Negligible
10. STABILITY AND REACTIVITY
Stability : Stable
Hazardous Reactions : Dust explosion, like most finely divided organic powders.
Conditions to Avoid : Electric discharge, throwing into fire.
Materials to Avoid : Oxidizing Materials
Hazardous Decomposition Products : CO, CO
2
and NO
X
Further Information : None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion(oral) : LD
50
>2000mg/kg
Dermal : LD
50
>2000mg/kg
Inhalation : LC
50
>5.00mg/l (Rat,4hr)
Eye irritation : Not an irritant
Skin irritation : Not an irritant
Skin sensitizer : Not sensitized
Mutagenicity : Negative(Ames Test)
Carcinogenicity : NTP?
IARC Monographs? OHSA Regulated?
No No No
12. ECOLOGICAL INFORMATION
Ecotoxicity
On available data, toner is not harmful to aquatic organisms
Page:3/4