User Manual

2-44

COPIER►BASIC PROCEDURE FOR MAKING COPIES

Saddle Stitch

Tap the [Staple / Punch] key.

► COPY MODE (page 2-3)

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.

► Specifying the orientation of the original (page 2-33)

Select .

After the settings are completed, tap .

Select binding edge and original settings.

► MAKING COPIES IN PAMPHLET FORMAT (BOOKLET) (page 2-61)

After the settings are completed, tap .

In normal mode

• If you need to change the output tray, tap the [Output Tray] key and select the output destination before selecting

stapling.

• If [Booklet] is already specified in [Others], you do not need configure binding edge and cover settings.

• If [Booklet] is specified in [Others], the saddle stitch screen appears. Confirm the message shown on the screen, and

tap the [On] key. (If you select "Settings (administrator)" → [System Settings] → [Common Settings] → [Device

Control], then set the [Automatic Saddle Stitch] check box to .)

• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Divide], [Continue] or

[Cancel].

[Divide]: Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the cover

settings are selected.

[Continue]: Continues sorting without stapling.

[Cancel]: Cancels the staple sort setting.