User Manual

4-60
FACSIMILE►FAX RECEPTION
PRINTING RECEIVED DATA AT A SPECIFIED TIME
You can start printing the received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you
do not urgently need to print.
• The printed data is automatically deleted from memory.
• If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
• This function can be used when "Settings (administrator)" -
[ System Settings ] → [Image Send Settings] → [Common
Settings] → [Condition Settings]
→ [Preview Setting] → [Received Data Image Check Setting] is enabled.
If Hold Setting for Received Data Print is enabled, this function is not available.
• To print received data at the specified time:
In "Settings", select
[ System Settings ] → [Image Send Settings] → [Common Settings] → [Condition Settings]
→ [Time Specified Output of Received Data].
• To disable the hold setting for received data print:
In "Settings (administrator)", disable this function using
[ System Settings ] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Hold Setting for Received Data Print].
Set to print data
received during the day
at 20:00
At 20:00, printing
begins automatically
Prints