User Manual

1-66

BEFORE USING THE MACHINE►LOADING PAPER

Setting orientation of the print side

The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and

"Pre-Printed", set the paper in the reverse orientation.

Place with the print side facing the direction indicated below.

Paper that cannot be used

• Special media for an ink jet printer

(fine paper, glossy paper, glossy film, etc.)

• Carbon paper or thermal paper

• Pasted paper

• Paper with clips

• Paper with fold marks

• Torn paper

• Oil-feed transparency film

• Thin paper less than 55 g/m

(15 lbs)

• Heavy paper as thick as 300 g/m

(110 lbs. cover) over

• Irregularly shaped paper

• Stapled paper

• Damp paper

• Curled paper

• Paper whose print side or reverse side has been already printed on by another printer or multifunction device.

• Paper with a wave-like pattern due to moisture absorption

• Paper with creases

• Paper with dust

Non-recommended paper

• Iron-on transfer paper

• Perforated paper

Tray In normal status With letter head or pre-printed paper set

Trays 1 - 4 Facing up Facing down

Bypass, Tray 5 Facing down Facing up

When [Disabling of Duplex] is set for "Letter Head" or "Pre-Printed", set the print side in the same orientation as for the

ordinary operation.

To set [Disabling of Duplex]:

In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Disabling of Duplex].