User Manual

7-10
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an inner finisher/finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is installed.
*2 When an inner finisher/finisher/finisher (large stacker)/saddle stitch finisher/saddle stitch finisher (large stacker) is installed and a
punch module is installed.
 Disabling Registration of Custom Image Disabled No Yes
 Disabling sending while copying Disabled No Yes
 High Quality Scan from Document Feeder (B/W) Disabled No Yes
 Quick Scan from Document Glass (B/W) Disabled No Yes
 Auto Clear Before Copy Execution Also Disabled No Yes
X Initial Status Settings No Yes
 Colour Mode Full Colour No Yes
 Image Orientation Portrait No Yes
 Paper Tray Varies depending on the machine
configuration
No Yes
 Exposure Type Auto No Yes
• Copy of Copy Disabled No Yes
• Colour Tone Enhancement Disabled No Yes
 Copy Ratio 100% No Yes
• Select magnification automatically according to
paper size, when paper tray is selected.
Disabled
No Yes
 2-Sided Copy 1-Sided→1-Sided No Yes
 Original Binding Book No Yes
 Output Binding Book No Yes
 Output Auto No Yes
 Output Tray Varies depending on the machine
configuration
No Yes
 Offset Enabled No Yes
 Staple Sort
*1
– No Yes
 Staple Position
*1
– No Yes
 Separator Page No Yes
• Insert Before Job Disabled No Yes
• Insert After Job Disabled No Yes
 Punch
*2
– No Yes
X Text /Image Printing No Yes
 Text Settings (Stamp) – No Yes
 Custom Stamp – No Yes
 Custom Watermark – No Yes
Setup Items Factory default setting U A