User Manual

7-11
SYSTEM SETTINGS►SETTING MODE LIST
Printer Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A
● Printer Settings (page 7-87)
X Condition Settings No Yes
 Prohibit Notice Page Printing Enabled No Yes
 Prohibit Test Page Printing Disabled No Yes
 A4/Letter Size Auto Change Disabled No Yes
 Bypass Tray Settings No Yes
• Enable Detected Paper Size in Bypass Tray Disabled No Yes
• Enable Selected Paper Type in Bypass Tray Disabled No Yes
• Exclude Bypass-Tray from Auto Paper Select Disabled No Yes
 Job Spool Queuing Enabled No Yes
 Disabling of USB Memory Direct Print Disabled No Yes
 Disabling of Network Folder Direct Print Disabled No Yes
 Disabling sending while printing Disabled No Yes
X Interface Settings No Yes
 Hexadecimal Dump Mode Disabled No Yes
 I/O Timeout 60sec. No Yes
 Enable Network Port Enabled No Yes
 Network Port Emulation Switching Auto No Yes
 Port Switching Method Switch at End of Job No Yes
X Initial Status Settings Yes Yes
 Copies 1 Yes Yes
 Orientation Portrait Yes Yes
 Paper Size A4 (8-1/2" x 11") Yes Yes
 Output Tray Varies depending on the machine
configuration
Yes Yes
 Paper Type Plain Yes Yes
 Resolution Setting 600dpi (High Quality) Yes Yes
 Disable Blank Page Print Enabled Yes Yes
 2-Sided Print 1-Sided Yes Yes
 Colour Mode Auto Yes Yes
 N-Up 1-Up Yes Yes
 Fit To Page Enabled Yes Yes
 Output Varies depending on the machine
configuration
Yes Yes
• Separator Page Yes Yes
- Insert Before Job Disabled Yes Yes