Government Compliance

Page 10 of 14
(i) Products shall be designed to avoid causing the
screen to flicker with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports
Conforms
[For Touch Panel]
(j) Products which are freestanding, non-portable, and
intended to be used in one location and which have
operable controls shall comply with the following:
(j)-(1)The position of any operable control shall be
determined with respect to a vertical plane, which is
48 inches in length, centered on the operable control,
and at the maximum protrusion of the product within
the 48 inch length (see Figure 1 of this part).
Supports
Applicable
(j)-(2)Where any operable control is 10 inches or
less behind the reference plane, the height shall be
54 inches maximum and 15 inches minimum above
the floor.
Supports
Applicable.
Operable control is 5 inches behind the reference
plane.
The height is 37 inches above the floor.
Document Feeder also meets the requirement in (j)-2
because it can be stopped at any position.
(j)-(3) Where any operable control is more than 10
inches and not more than 24 inches behind the
reference plane, the height shall be 46 inches
maximum and 15 inches minimum above the floor.
Supports
(j)-(4)Operable controls shall not be more than 24
inches behind the reference plane (see Figure 2 of
this part).
Supports
Return to the top of the page.
Section 1194.26 Desktop and Portable Computers – Detail
VPAT™
Voluntary Product Accessibility Template
®
Criteria
Supporting Features
Remarks and explanations
(a) All mechanically operated controls and keys shall
comply with §1194.23 (k) (1) through (4).
Not Applicable
(b) If a product utilizes touchscreens or touch-
operated controls, an input method shall be provided
that complies with §1194.23 (k) (1) through (4).
Not Applicable
(c) When biometric forms of user identification or
control are used, an alternative form of identification or
activation, which does not require the user to possess
particular biological characteristics, shall also be
provided.
Not Applicable
(d) Where provided, at least one of each type of
expansion slots, ports and connectors shall comply
with publicly available industry standards
Not Applicable
Return to the top of the page.